Gamber-Johnson 7160-0568-xx - Manual (Page 3)

INSERTING AND REMOVING THE COMPUTER
INSERTING THE COMPUTER
Un-latch the cradle, making sure 1.
the rear hooks move backward
(Figure 1).
With the computer held at an
2.
angle, place the two notches on
the front edge of the computer
into the front hooks.
(Figure 2)
Lower the computer down on to
3.
the cradle.
While pushing the computer down,
4.
to compress the cradle connector,
close the latch to engage the rear
hooks into the notches on the
back edge of the computer.
(Figure 3)
Lock the latch, if required, for
5.
security.
Adjust the position of the screen
6.
support.
(Figure 4)
REMOVING THE COMPUTER
Move screen support back, close 1.
display.
Unlock latch, if locked.
2.
Press the Lock Button on the latch. 3.
The latch will spring open and the
rear hooks will disengage from the
computer case.
Lift computer up off cradle, back
4.
edge first.
Figure 2
Figure 3
Figure 4
Figure 1
page 3/3