Gamber-Johnson 7160-0529 - Manual (Page 2)

2/3
The Clamshell Display Mount can be
mounted on any Gamber-Johnson
pole or console box with a swivel
pattern cutout.
Assemble the components as shown
above.
Tighten the .25-20 nylok nuts to get
the desired amount of friction when
swiveling the Display Mount.
Clamshell
Display Mount
Steel Backup Plate
2X .25-20 Carriage Bolts
1X .25-20 Hex Head Bolt
Nylon Bearing
Nylon Bearing
Steel Backup Plate
3X .25-20 Nylok Nuts
Mounting Surface with
Gamber-Johnson Swivel Pattern