Gamber-Johnson 7160-0521-xx - Manual (Page 3)

Console Installation:
4. Loosen the 4 screws that hold
the parking brake cover plate
inside the console box with an
1/8" Allen wrench. Remove the
top plate from the console box
using a 5/32" Allen wrench. See
Figure 1.
5. Place the console into position
between the seats. See Figure 5.
(Gamber Johnson does not have a
picture with the top plate removed
for installaion)
7. Attach the rear of the console
box to the location that you
removed the 2 bolts from earlier.
Use the M6 x 45mm bolts, Spacers,
and flat washers found in the
hardware bag. See Figure 7.
6. Attach the front legs to the
vehicle mount with the 1/4-20 x
3/4" bolts and flat washers
included in the hardware bag.
See Figure 6.
8. Attach the Top Plate to the
console box with the 1/4-20
screws removed earlier. See
Figures 1 & 8.
9. Tighten the #10-32 screws that
hold the parking brake cover in
place. See Figures 1 & 8.
Figure 5
Figure 6
Figure 7
Figure 8