Gamber-Johnson MCS-CUP2 - Manual

If you need assistance or have questions, call Gamber Johnson at 1-800-456-6868.
INSTALLATION INSTRUCTIONS
Product Date Form #
Mission Control Series Cupholders 6-20-02 INST51
MCS-CUP & MCS-CUP2
The Single & Double Cupholders, MCS-CUP & MCS-CUP2, are designed to attach to
MCS console boxes or DS-POLE assemblies.
Attaching MCS-CUP or MCS-CUP2 to MCS console box (Fig. 1)
1. The cupholder assemblies can be attached to either high or low ends of the MCS console
box.
Place cupholder bracket (item 1), against console box and attach by inserting two 10-32 x .25
pan head screws (item 2), into the threaded inserts in the console box end plates. If needed the
cupholder (item 3), can be removed from the bracket by removing the two 8-32 x .25 pan head
screws (item 4). DO NOT OVER TIGHTEN WHEN REPLACING THE CUPHOLDER AS IT MAY
BE DAMAGED.