Gamber-Johnson 7160-0034 - Manual

CF-19 Harley Davidson Mount &
Pentax Pocketjet Printer Mount w/Printer Roll Isolator
INSTALLATION INSTRUCTIONS
Product Revision Form #
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
7160-0034 & 7160-0035
Rev. B INST-333
PS-001
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
The purpose of this installation instruction to illustrate the manufacturer's recommended
method of installation of the Harley Davidson CF-19 Articulating Computer Mount.
1. To begin, remove the four
bolts that mount the Harley
Davidson Tour Pack to the
frame of the motorcycle. Set the
Computer Mount into the Tour
Pack and align the holes in the
Base Plate with the mounting
holes of the Tour Pack (see FIG.
2 & 3). Use the hardware
removed previously to securely
fasten the Computer Mount and
re-attach the Tour Pack.
2. Next, with the lid of the Tour
Pack open, pull the Mounting
Plate into its working position
(see FIG. 4). Attach the CF-19
Cradle. If used, attach the
Pentax Pocket Jet Printer Mount
and Paper Guide as shown (see
FIG. 5).
Mounting
Holes
Harley Davidson
Tour Pack
Base
Plate
Mounting
Holes
FIG. 2
FIG. 3
Sheet 1 of 2
FIG. 1
CF-19 Harley Davidson
Computer Mount
© copyright 2010 Gamber-Johnson, LLC