Gast 1023 Series Lubricated Vacuum Pumps and Compressors - Manual (Page 6)

Lubrication
Series 0323 and 0523:
These models use a siphon oiler. The
lubrication rate is determined by the
temperature, the operating vacuum or
pressure, and the siphon jar oil level. Keep
the siphon jar filled to the line shown on the
jar. Either unscrew the jar or fill through the
spring-loaded cap.
All Models:
The oil wick should be folded in half, with the
two ends submerged in the oil at the bottom
of the Jar, and the folded center inserted into
the connector approximately 3/8" past the two
breather holes in the connector (but not
touching the feed hole leading to the pump).
Both the breather holes and the feed hole
must be unrestricted.
EXPLODED PRODUCT VIEW, PARTS & ORDERING INFORMATION
0323/0523 SERIES
REF DESCRIPTION QTY 0323-V3 0523-V3
NO.
1 BODY 1 AK503 AK505
2
∆
VANE 4 AK731 AK731
3 SHROUD 1 AK502 AK502
4 END PLATE 1 AK516B AK516B
5 SIPHON OILER 1 AA930A AA930A
6
∆
COVER GASKET 1 AA932 AA932
7
∆
WICK 1 AA934 AA934
8 JAR 1 AA935A AA935A
9 FILTER ELEMENT ASSM. 1 B343B B343B
10
∆
FILTER FELT 4 B344A B344A
11 INTAKE FILTER ASSM. 1 V400G V400G
12
∆
COVER GASKET 2 B62A B62A
13 MUFFLER ASSEMBLY 1 V425K V425K
14 JAR 2 AA125A AA125A
15 FOOT SUPPORT ASSM. 1 AC136 AC136
*** SERVICE KIT 1 K485 K485
6
∆ Parts included in repair kit
70-325 Rev G.qxd:70-325 Rev D.qxd 2/11/11 2:29 PM Page 6