General Machine Products 70530 Adams WG Winch - Manual (Page 26)

Page 26 of 28 www.gmptools.com
1a. General Machine Products Co., Inc. ("GMP") warrants to the purchaser and/or end user:
(1) that a new product sold and manufactured by GMP will be free from original defects in material and workman-
ship for one year from the date the product was delivered to the purchaser and/or end user, or for the lifetime of
the Modular Plug Presser;
(2) that a new product sold and not manufactured by GMP will be covered exclusively by the manufacturer's war-
ranty. However, if that warranty coverage shall provide less coverage than the GMP Warranty for its manufactured
products, then the warranty set forth in Paragraph 1(a)(1) above shall apply instead;
(3) that a reconditioned used GMP product sold by GMP, or a non-owned product repaired by GMP, or a new part
sold by GMP, will be free from original defects in material and workmanship for ninety days from the date the
product was delivered to the purchaser and/or end user.
1b. The above warranties are contingent upon and subject to the condition that: (1) the end user substantiates the
date it purchased and received delivery of the product or part, and (2) the product or part shall have been in-
stalled, maintained and used in accordance with GMP's or the manufacturer's written instructions.
2. The end user shall determine the suitability of GMP's product or part for intended use, and the end user as-
sumes all risk and liability whatsoever in connection therewith except to the extent set forth in this Limited War-
ranty.
3a. GMP reserves the right to request that the product or part be returned to us for examination and cannot be
responsible for user charges incurred in the replacement of any product. GMP's agreement to repair or replace is
also subject to its inspection of the product and verification of the defect.
3b. Subject to immediate written notification of a defect or malfunction, GMP will repair or replace that product or
part, at GMP's option, returned freight prepaid to Trevose, PA.
3c. To obtain repair or replacement service under the Limited Warranty, the purchaser must contact the factory for
a Return Material Authorization (RMA). Once obtained, send the RMA along with the defective part or product,
transportation prepaid to:
General Machine Products Co., Inc.
3111 Old Lincoln Highway
Trevose, PA 19053 USA
Tel: 215.357.5500
3d. The field labor and material charges incurred by an authorized GMP dealer or an end user to disassemble,
inspect, repair and reassemble our product or part at their respective prime locations will not be reimbursed unless
GMP has first reviewed and approved those charges.
3e. Incidental repair charges incurred by an authorized dealer or an end user for items such as labor, transporta-
tion, tolls, lodging and meals at a location remote from its prime facility, or to demount our product or part from its
remote location and forward to its prime facility, are not the responsibility of GMP, and are not covered by this
Warranty.
3f. Incidental repair charges incurred by an authorized GMP dealer or end user to remove construction hardware,
modify a vehicle or otherwise gain access to GMP's product or part, is a condition beyond GMP's control, and is
not covered by this Warranty.
4a. GMP products or parts which become part of a total assembly which has been designated and/or manufac-
tured by others, are not covered by this Warranty unless GMP reviews the total assembly and expressly extends
its warranty.
4b. Design, material and workmanship furnished by others to install or operate a GMP product or part are not cov-