General Machine Products 75254 Guy Strand Cutter - Manual

General Machine Products Co., Inc. • 3111 Old Lincoln Hwy • Trevose, PA 19053-4996 • USA
TEL: 215-357-5500 • FAX: 215-357-6216 • E-MAIL: [email protected]
4/11/2007 AK
Open handles
slightly and
press and hold
release lever in.
Pull slide open to
expose entry and
insert cable
Open tool handles,
push slide in with
cable as far as
possible
1
2
3
Slide
Release
Cable
Entry
Push slide in
with cable as
far as possible
Open (wide) & close handles listening for ratchet click to cut cable. The ratchet
mechanism will then pull the cable with each click into the tool until cable is cut.
Operation of the strand cutter…..Is easy as 1, 2, 3
Instructions
The GMP Guy Strand Cutter is a revolutionary new tool design
for cutting guy strand cable up to 1/2 inch EHS. At 11 lbs., this
progressive action cutter gives you enormous mechanical advan-
tage in a compact tool that measures less than 30 inches.
Never use this tool to cut electrically energized cable. Severe or
fatal injury may result.
P/N 75254
Manual P/N 31992