GLOBALSAT GH-561 User Manual - Manual (Page 8)

7
3.4 Battery Introduction
The GH-561 uses a built-in Li-Polymer
rechargeable battery. A battery icon
shown on the left bottom corner of
screen indicates the remaining battery
power.
z
To charge the battery:
1. Connect one end of the
provided USB charging cable
with the GH-561 unit and the
other end with the AC adapter
or USB port on your PC.
2. The GH-561 unit may need
about 5-6 hours to fully charge
the battery.
Note: Please fully charge before first use.
4. Getting Started
4.1 Starting the GH-561
Press and hold the Power button for 2
seconds to turn on the device. You will see
the welcome screen displayed.
Allow the GH-561 a short period of time to
track satellites for the first time you use it.
Take your GH-561 outside or to an open
space with a clear view to the sky and it will
make acquiring a satellite signal easier.
Press the ‘’OK’’ button to exit the Locating
Satellites screen.