Grayhill Racks 4 Channel - Manual

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
System 50
System 50
9 8 7 6 5 4 3 2 1
9 8 7 6 5 4 3 2 1 B
AC
OUTPUT
R
DC
OUTPUT
Y
AC
INPUT
W
DC
INPUT
STANDOFF I.D. 0.15 ( 3,8),DIA.
(4 PLACES)
CLEARANCE FOR #6 SCREW
9 POSITION TERMINAL
STRIP FOR GROUND
AND LOGIC SIGNALS
3.00
(76,2)
3.50
(88,9)
0.25 (6,4)
0.25 (6,4)
4.00 (101,6)
4.50 (114,3)
STATUS LED
3.3K RESISTOR
5 AMP FUSE
TERMINAL STRIP FOR
FIELD WIRING
2.20 (55,9)
MAX.
0.75 (19,1)
MODULE SHOWN FOR
REFERENCE ONLY
NOTE: MAXIMUM
TERMINAL SCREW
TORQUE NOT TO
EXCEED 5 IN-LBS.
4 CHANNEL RACK: G5
Part No. 70RCK4
Dimensions are shown in inches
(and millimeters).
All tolerances are ± 0.010 (0,25)
unless otherwise specified.
4 CHANNEL RACK: Standard
Panel Mount
DIN-Rail
Mount
RACKS
4 Channel
FEATURES
• Use for Isolating and Coverting Signal Types to
Standard Logic Voltages
• Terminal Block Connection for Input and Output
• Available for Standard and G5 I/O Modules
• Panel and DIN Rail Mount Versions
• UL, CSA Certified
System 50
4
B R
Y W
AC OUTPUT DC OUTPUT
AC INTPUT DC INTPUT
1 2 3 4 5 6 7 8 9
9 8 7 6 5 4 3 2 1
2.75 (69,85)
3.25 (82,55)
2.75
(69,85)
.76 (19,30)
4.27
(108,46)
.25
(6,35)
SWAGED
STANDOFF
THRU HOLE
.15 (3,81) DIA.
(4 PLACES)
(CLEARANCE
FOR #6 SCREW)
9 POSITION
TERMINAL
STRIP FOR
CONTROL
LOGIC
3.36
5,34)
.75
(19,05)
9 POSITION
TERMINAL
STRIP FOR
FIELD WIRING
4.00
(101,6)
4.70
(119,38)
DIN-RAIL CARRIER NOTE: MAXIMUM TERMINAL
SCREW TORQUE NOT TO
EXCEED 5 IN-LBS.
Part No. 70GRCK4
Dimensions are shown in inches
(and millimeters).
All tolerances are ± 0.010 (0,25)
unless otherwise specified.