Great Northern Popcorn 6270 Gumball Machines - Manual (Page 3)

Copyright 2011 DTX International
Old Fashioned Gumball Machine
ASSEMBLY AND USE
Enjoying Your Old Fashioned Gumball Machine...Continued
HOW TO ALLOW YOUR MACHINE TO
DISPENSE FREELY:
If you do not want to require your machine to be
coin-operated, first:
1. Disassemble the machine.
2. Lay the coin mechanism on its face, coin
slot down.
3. Take out the flat black spring (11) and brass
coin dog arm (12) from the back of the coin
mechanism and set aside. Do not discard,
as you may wish to convert back to coin
operation in the future.
GENERAL PRECAUTIONS:
ALWAYS USE CAUTION WHEN REASSEMBLING MACHINE. DO NOT OVERTIGHTEN SCREWS,
ESPECIALLY NEAR GLOBE AS GLOBE MAY BE DAMAGED.
ALWAYS WATCH SMALL CHILDREN WHEN AROUND MACHINE. NEVER LEAVE UNATTENDED
AROUND SMALL CHILDREN WHO MAY BE SUSCEPTIBLE TO CHOKING.
USE CAUTION WHEN FILLING GLOBE, POUR GENTLY TO LESSEN IMPACT ON GLASS.
NEVER CLEAN WITH ABRASIVE CLEANERS. USE MILD DETERGENT AND WATER.
CONTROLLING CANDY FLOW:
You may wish to alter the rate at which your product is dispensed. To do so:
1. Remove the cap lock, cap, nut, ring and gasket and the brush-off plate (6).
2. Next, adjust the dispensing wheel. If your wheel is not able to turn, your model may have the
wheel held in place with set screws. Simply loosen them enough for the wheel to turn, adjust
and then re-tighten.
3. Reassemble. Note: when reassembling, make sure the brush-off plate covers the candy
chute.
11
12