Greenguard, Flashing installation guide – GreenGuard Flashing User Manual

Page 2

Advertising
background image

Installation – General

A. Unroll the GreenGuard

®

Flashing and cut pieces using

a common utility knife. Be sure to cut pieces to allow

for a minimum of 4 inches of overlap of intersecting

flashing pieces.

B. Begin by peeling back the release paper and pressing

the flashing firmly to the substrate, ensuring that there

are no wrinkles or bubbles. Continue to press and

smooth out the flashing, working along the sealed

area to ensure adequate bonding.

C. If additional pieces are necessary to span a wide

area, several courses can be installed by overlapping

each course a minimum of 2 inches.

D. On wall applications, the edge of the flashing must

be kept at least ½ inch from the finished exterior and

must not come into contact with any visible sealants.

E. GreenGuard

®

Flashing shall be covered with the

finished exterior covering as soon as scheduling
permits.

GreenGuard

®

is a registered trademark of Pactiv LLC

©2013 Pactiv LLC

10/13

INSTL-FLASH

1-800-241-4402 www.TrustGreenGuard.com

GreenGuard

®

Flashing Installation Guide

Common Installation Details

IMPORTANT NOTE:

For more specific installation details, go to www.TrustGreenGuard.com and download the

“GreenGuard

®

Moisture Management Residential or Commercial Installation Guides”.

Storage and Handling

• Protect GreenGuard

®

Flashing from exposure to excessive heat and cold. Store in clean, dry area in the original

cartons.

• If stored outdoors, protect the GreenGuard

®

Flashing from exposure to rain, direct sunlight, or other harmful

environmental conditions.

Standard Product Warranty

Pactiv warrants this product to be free from defects in workmanship and materials only at the time of shipment from its

factory. If materials are determined to be defective, Pactiv will, at its option, replace the defective material or refund the

purchase price.
This limited warranty is the only warranty extended by Pactiv with respect to this material. NO OTHER WARRANTY,

EXPRESS OR IMPLIED, IS GIVEN AS TO THE MERCHANTIBILITY, FITNESS FOR PARTICULAR PURPOSE, OR OTHERWISE
WITH RESPECT TO THE PRODUCTS REFERRED TO.

For more information on specific products, contact your Pactiv Building Products representative.

For the most current product information go to www.TrustGreenGuard.com.

Advertising