Status, Arp table, Wireless association table (wireless router only) – Billion Electric Company BIPAC 6404VGP User Manual
Page 21: Routing table, Tatus, Wireless association table, Dhcp table
VoIP/(802.11g) Broadband Firewall Router
Chapter 4: Configuration
Status
ARP Table
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of
Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the
MAC address of the network interface of your PCs to use with the router’s
Firewall – MAC Address
Filter function. See the Firewall section of this manual for more information on this feature.
IP Address: A list of IP addresses of devices on your LAN (Local Area Network).
MAC Address: The MAC (Media Access Control) addresses for each device on your LAN.
Interface: The interface name (on the router) that this IP Address connects to.
Static: Static status of the ARP table entry:
“
no” for dynamically-generated ARP table entries
“
yes” for static ARP table entries added by the user
Wireless Association Table (Wireless Router Only)
IP Address: It is IP address of wireless client that joins this network.
MAC: the MAC address of wireless client.
Routing Table
Routing Table
Valid: It indicates a successful routing status.
Destination: The IP address of the destination network.
Netmask: The destination netmask address.
Gateway/Interface: The IP address of the gateway or existing interface that this route will use.
20