Hawke Optics Digital 5x - Manual (Page 6)

9 10
focusing
• Remove the objective lens cover and look through
the eyecup at the screen.
• Adjust the dioptre focus ring until the icons on the
screen are sharp.
• Adjust the objective focus wheel until the desired
viewing image is sharp.
• The infrared illuminator should be used to achieve
the optimum viewing image.
• If the environment is light enough, the infrared
illuminator can be turned off to save power.
• Be careful not to block the infrared illuminator, as
this will affect the viewing image.
screen brightness
• The brightness adjustment menu allows you to alter
the brightness of the digital display.
• While in photo or video mode, press the “IR” button
to enter the brightness adjustment menu.
• As shown on the image above, the number after the
word “Bright” is the current screen brightness.
• Press the “down” button to reduce the brightness
and the “up” button to increase it. There are 9 levels
of brightness in total with 9 being the brightest.
• To exit the brightness adjustment menu, press the
“IR” button twice.
Bright: 7
LAMP: 0
*