Heidolph RotaChill - Manual (Page 9)

110-509 HD/EN 8
Quick-Start
Unless otherwise specified, quick-start instructions apply to all models.
See Installation & Startup for additional information.
1 Fill reservoir with fluid
2
Connect all power cords and
control cables
3
Turn Power Switch / Circuit
Breaker ON
(Refrigerating/Heating Baths
only)
4 Turn Controller ON
Maximum: 1 in / 2.54 cm
below the underside of the
top deck
Minimum: 2.6 in. / 6.7 cm
below the underside of the
top deck
IEC Power Cord
(Temperature
Controller to
Refrigeration
Power Module
Refrigeration
Control Cable
(Temperature
Controller to
Refrigeration
Power
Module)
IEC Power
Cord to Mains
Refrigerated
Circulators