Heidolph Automatic Module Distimatic - Manual (Page 32)

Installation Installation
62 63
Remove the clamping unit (1) at the condenser.
Loosen thumb screws (2) on reverse side of protective cabinet and slide consoles (3)
upwards with the condenser.
Secure thumb screws (2) so they are hand-tight in this position.
Condenser
1
3
3
2
2
3
Cover
Detach cover (4).
Remove screw connection at distributor.
Remove the clamp at the distributor.
Remove the distributor.
Distributor
(only on Distimatic including automatic drainage of residue)