Heidolph Heat-On - Manual (Page 3)

Page 2
Thank you for purchasing Heat-On
Please read this Instruction Manual thoroughly before operating your unit.
Introduction
Heat-On is a modular heating and stirring work station designed to accept either one or two round bottom flasks from 10ml to 5 litres.
Heat-On offers the following features and benefits:
• All Heat-On blocks are manufactured from solid aluminium providing excellent, even heat transfer to the
entire block, preventing hot spots.
• Sleek weight saving design reduces the mass of the block to be heated, improving heat-up times.
• Uniquely shaped deep wells maximise heated surface area to improve heat-up time and minimise the difference
between the block and solution temperature.
• Fluoropolymer coating gives added durability.
• Tests have shown that a 250ml flask of water can be boiled in under 9 minutes, 50% faster than the competition.
• All Heat-On blocks have a probe hole for use with separate temperature probe.
• Heat-On blocks can be used up to 200˚C without damage to the block. Temperatures up to 260˚C can be achieved
but some minor surface degradation may occur.
Heat-On Instructions
Heidolph-Heat-On Instructions 23-03-09:2nd draft amends 16-03-09 23/3/09 15:37 Page 3