Heidolph Incubator 1000 - Manual (Page 23)

23
E
DISASSEMBLY & STORAGE
Disassembly
1. Turn item OFF and disconnect mains plug.
2. Remove all of the hardware arranged around the incubator to ease disassembly.
3. Unload all flasks and beakers from incubator, uninstall optional equipment.
Forward & Store
1. We recommend to store the item and its components in its original box, or a similar
container that offers adequate protection against damage in transit. Tape the box
securely.
2. Store the item in a dry place.
Caution
Do not jolt or shake the item during transport.
DISPOSAL
For disposal, please comply with your local or national regulations.
Split by metal, plastic, etc.
Packing material to be treated as described above (material split).
TROUBLESHOOTING
Work on electric and electronic components is limited to qualified personnel.
Heater module master switch dim
1. check power cord
2. check circuit breakers on back side
Heater module fan won't run
1. fan stuck (foreign matter in vent holes)
2. fan broken
Heater module won't heat
1. nominal temperature set to a value below actual ambient.
2. overheat protection disconnected heater.
Remedy:
allow heater to cool down, check vent holes for clogging.
3. electronic problem (annunciators dim).