Heidolph SilentCrusher S - Manual (Page 27)

27
E
2 Dispersing with Tools 3 F, 5 F, 7 F
Now remove the test tube from the dispersion tool
with a slight clockwise rotation and pull downward.
Fill the test tube with the sample to be dispersed
(Note: for filling quantities, see below).
Then reinsert the filled test tube with a slight
counterclockwise rotation and press upward on the
dispersion tool until it reaches the stop.
Filling Table:
Tool Min.
Fill Quantity
Max.
Fill Quantity
3 F 0.8 ml 1 ml
5 F 2 ml 4 ml
7 F 6 ml 10 ml
Attention: Never homogenize with either to high or to low liquid level in test
tube. PTFE bearing (Q, see chapter 6.2-Cleaning and Maintenance) and
the rotor (O, see chapter 6.2-Cleaning and Maintenance) could become
damaged.