Chapter 1 introduction, 1 overview of the product, 2 features – HiRO H50219 User Manual

Page 3: 3 led status, Chapter 2 installation guide

Advertising
background image

2

Chapter 1 Introduction

1.1 Overview of the product

Congratulations on your purchase of this 10/100/1000Mbps PCIe LAN Card. The Adapter

provides the bandwidth capability to support high-end servers and workstations. With

Auto-negotiation, this card can run on three different speeds: 10Mbps at half and full

duplex, 100Mbps at half and full duplex, and 1000 Mbps at full duplex. When running at

1000Mbps, it provides a network throughput of 2 Gbps in full-duplex mode.

Instructions for installing and configuring this product can be foun d in this manual. Before

you install and use this product, please read this manual carefully for full exploiting the

functions of this product.

1.2 Features

Compliance with IEEE802.3ab 1000BASE-T Gigabit Ethernet standards, IEEE802.3u

Fast Ethernet standards

Plug-and-Play installation

Support half and full duplex at 10Mbps, half and full duplex at 100Mbps,and full duplex

operation at 1000Mbps

One build-in RJ45 connector

Auto-Negotiation to the highest available speed

Support IEEE802.1P Layer 2 Priority Encoding

Support Full Duplex flow control (IEEE 802.3x)

Support IEEE 802.1Q VLAN tagging

Build-in FIFO buffers reduce overhead of memory transfers

Support Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) and large send offload

Support Jumbo Frame transfers

Two LED indicators: 10/100/1000M Link, 10/100/1000M Act

Driver support for:

Microsoft Windows Series.

Linux

Novell Netware Series

MacOS

1.3 LED Status

The Adapter features two LED indicators:

LINK/ACT: Steady green indicates good linkage between the adapter and its supporting

server or switch. Flashing green indicates activity (transmitting or receiving) between the

adapter.

1000M : The LED indicator lights green when one 1000 Mbps device is connected to the

adapter.

Advertising