Hydro-Logic StealthRO200 - Membrane Flush Kit User Manual

Hydro-Logic Accessories for water

Advertising
background image

Remove flow restrictor

The arrow on the flow restrictor should point the same direction as flow of water.

Flow

Restrictor

This kit allows you to bypass the flow restrictor and "power flush" the membrane(s) to remove scale build-upand organic and inorganic contaminants from the mem-

brane surface. By flushing the membrane(s) regularly you can help extend the life of the membrane(s). Ideally, you want to flush the membrane(s) for 3-5 minutes

directly after every time you use the Reverse Osmosis unit.

Installation Instructions:

Install flow restrictor between the two short

peices of blak tubing in the flush kit

3

4

To “power flush” the membrane(s) simply leave the ball valve (on the blue

product line) to the open position and turn the ball valve on the black waste

water line to the open position (parralel to the black waste water line). Flush

membrane(s) for 2-3 minutes after each use or at least once a week. This

will extend the life of your membrane(s). Once finished turn the ball valve

handle on the drain line back to the position displayed in step 3 for normal

operation.

888-426-5644

www.hydrologicsystems.com

[email protected]

Useful Video Links

How to Operate Quick Connect Fittings:

http://youtu.be/EhWXj6DWcH0

Stealth RO100 and Stealth RO200 Membrane Flush Kit Instructions:

http://youtu.be/uonUBVmW0vc

Advertising
This manual is related to the following products: