iCreation i-900 - Manual (Page 26)

23 26
Chapter 3: Basic Functions
Making a Call
You can place your calls in two ways:
Lift the handset and press to engage the line. You hear a
dial tone, and the indicator above the lights on.
Dial a telephone number (up to 32 digits), which appears on
the screen. When you hear your called party, speak with a
normal voice.
To end the call, press or place the handset on the base.
Enter a telephone number. Press to insert a pause if
necessary. Check the number on the display.
If you make a mistake, correct it by using .
When the number correctly appears, lift the handset and
press to dial it out through a landline.
Or press to dial through your iPhone.
For more details please refer to
section.
To end the call, press or place the handset on the base.
Press or place the handset on the base to end a
cellphone call.
Clear
Bluetooth
beneath
Note: The Bluetooth phone must first be connected to the
iPhone via Bluetooth.
1
1
2
2
3
3
4
4
Traditional Mode
High-featured Mode
This procedure is more convenient and reliable,
:
because you
can check the number as you enter it
One-touch Memory
Storing a One-touch Number
Reviewing a One-touch Number
Dialing a One-touch Number
Up to 4 numbers can be stored in one-touch buttons ( ~ ). M1 M4
Press and hold one of ~ .
Enter the number (up to 20 digits), press to insert a
pause if necessary, then press .
Enter a name, then press . For additional
details, please see the " ".
Press or to select a ring to associate with the
number, then press .
M1 M4
Save
Save
Character Map
Select
beneath
beneath
beneath
Press one of ~ to review the corresponding number. M1 M4
1
2
3
4
Press one of ~ to review the corresponding number.
Lift the handset then press to dial the number out through
a landline.
Or lift the handset then press to dial through your iPhone.
M1 M4 1
2