iCreation i-500 - Manual (Page 14)

8
Connecting
Connect the plug of the power supply to the power jack of
the base, and then plug the power supply into a standard
AC wall outlet.
Charging
The BT handset uilt-
in rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
iPhone5, simply place it on the
base.
comes with a b
BT Handset & iPhone5
To AC wall outlet
Notes:
The red indicator light
ery
low.
will be on indicating the handset's
charging properly, and it will be off when the battery is
fully charged.
When the battery is low, the handset beeps twice every
30 seconds and the red indicator flashes three times
every 30 seconds. Charge it as described above, or
else the handset will shut down when battery is v
13
Chapter 3: Operations
Making a Call
Make calls on the iPhone5 in normal ways.
During a call, you can switch between your BT handset
and your iPhone5.
Using the iPhone5
Call Switching between the Handset and an iPhone5
During a call using the iPhone5, click on the display
of the iPhone5, then click . The call
switches to the .
To switch back, click on the iPhone5. The
call switches back to the iPhone5.
BT handset
1
2
Your handset also support voice dialing with some
iPhones. Before using this function, set up "voice-tags" on
your iPhone5.
Press MFB twice on the handset within 0.8 seconds.
When a beep occurs, say the desired number.
Voice Dialing (Siri)
Method 1: Using the iPhone5