Blaupunkt ALICANTE CD30 - Manual (Page 7)

26
Theft protection CODE
As a way of protecting your car radio
against theft, the system features a four-
digit code. You have to enter this number
every time the unit is disconnected from
your vehicle’s electrical power supply.
As a factory default, the code entry re-
quest function is deactivated. However,
you do have the option of activating this
function.
The numerical code is printed on the
pass card supplied with your unit.
Note:
Never keep your radio’s pass card in
your vehicle!
Activating/deactivating the code
In order to activate/deactivate the code
request function, proceed as follows:
➮
Press the ON button
4
to switch
off the unit.
➮
Press station buttons 1 and 4
=
at
the same time.
➮
Keep these station buttons pressed
while switching the unit on by
pressing the ON button
4
.
➮
Keep station buttons 1 and 4
=
pressed until “PUNKT” appears in
the display.
➮
Release the station buttons.
The code request function is now acti-
vated.
➮
Follow the same procedure to
deactivate the code request
function.
Note:
To prevent unauthorised persons from
deactivating the code, you will have to
enter the numerical code in order to
deactivate the code request function.
Entering the code
➮
Switch on the unit.
“CODE” appears in the display first of
all and is followed by four zeros.
➮
Keep pressing station button 1
=
until the first number of your code
appears in the display.
➮
Keep pressing station button 2
=
until the second number of your
code appears in the display.
➮
Keep pressing station button 3
=
until the third number of your code
appears in the display.
➮
Keep pressing station button 4
=
until the fourth number of your
code appears in the display.
➮
Once the correct code is displayed,
press the or button
:
.
Note:
If the code is entered incorrectly three
times, you will have to wait for a fixed
time period. “WAIT 1 H” appears in the
display. The unit must remain switched
on during this hour.
THEFT PROTECTION