Intelix DIGI-P122 - Manual (Page 12)

DIGI-P122 / DIGI-P123 Installation Guide
TCP/IP Setup and Control
IP Address Setup via Web Browser
Configuring the TCP/IP port is done via a web browser interface. A crossover cable is required for
the initial setup. The default IP address is printed on a sticker on the side of the DIGI-P122/123.
1. Configure the computer to use the same network prefix as the IP address assigned to the
DIGI-P122/123. For example, the IP address of the DIGI-P122/123 is 192.168.0.178. Set
the computer to use a static IP address within the same network range, such as
192.168.0.42.
2. Connect the crossover cable to the computer and to the TCP/IP port on the DIGI-
P122/123.
3. Open up Internet Explorer (Firefox, Chrome, and Safari crop the configuration options).
4. Enter the IP address printed on the sticker into the browser URL bar, which will take you
to the Login screen.
5. The Default password is “888888”.
12