I.R.I.S. 075 - Manual (Page 6)

Cabling (continued...)
The following cable specifications apply:
Video: 75Ω Coaxial Cable such as RG59, URM70, RG174 Mini-Coax.
Power: 2 core. Rated 12VDC - max Current 1A
Individual cables can be run for each of the above, or 'Combination' (Combi)
cables can be used. Iris Innovations supply pre-made cables to length. Please
contact Iris for more details.
The Camera:
The IRIS075 consists of the following:
Camera Setup:
Setting The Viewing Angle:
The IRIS075 is designed to be installed in any way, on it’s base, upside down
or on a bulkhead. Therefore it will be necessary to adjust the camera’s ‘eyeball’
accordingly within the cowling to achieve the correct orientation. This is done in
the following way:
1. On the underside of the camera there is a single cross headed screw that
holds a ‘T’ shaped ‘eyeball’ retainer plate in position. This is how the camera
is held into place against the outer shell. Carefully remove this screw and
keep safe.
Iris Innovations: IRIS106 User Guide. v1.00 072013
Outer Shell Base Fixing Plate
‘Eyeball’ Retainer
‘T’ Plate
Camera (Eyeball)