Jabra PRO 930 User Manual - Manual (Page 25)

25
english
7.8 HOW TO RESET ADVANCED SETTINGS
• Put on the headset.
• simultaneously press and hold the
mute button and both headset
volume buttons until the voice
prompt says “Factory default” and
then release the buttons.
the base will restart and reset the
settings, indicated by the white
battery icon on the base.
Reset
settings
FaCtoRY
DeFaULt
7.9 COPY SETTINGS TO mULTIPLE JABRA PRO 930 BASES
Jabra PRo 930 settings can be manually copied onto other Jabra PRo 930
bases.
1. Dock headset in the base.
2. Press and hold the headset mute button until the headset LeD flashes, and
then release. When the settings have successfully copied, the headset LeD
will turn solid white.
3. Undock the headset and dock in the new base to copy the settings to the
new base. the headset LeD will flash 5 times to indicate the settings are
being copied, and then will turn solid white when successfully copied to the
new base.
4. to copy the settings to multiple bases, repeat step 3.
5. When finished copying settings, redock the headset with the original base
(primary base), or press and hold the headset mute button until the headset
LeD flashes and then release.
7.10 FORCED PAIRING (PAIRING A NEW PRImARY HEADSET)
It is possible to force the Jabra PRo 930 to pair with a new headset, even when
it is currently paired with another headset.
1. Dock the new headset in the base.
2. Press the multi-function for 1-2 seconds. the headset LeD will begin to flash.
Forced pairing will take between 10 seconds - 2 minutes.
3. When paired successfully, the battery indicator will turn green (or red if the
headset battery is low).