Jabra WAVE - Manual (Page 10)

8
en
g
li
sh
Jabra WaVE
- Press the answer/end button once to put the active call on hold
and answer the waiting call .
- Press the answer/end button to switch between the two calls .
- tap the answer/end button to end the active conversation .
HoW tHE statUsDIsPLaY™ WorKs
Bluetooth®
Indicator
Indicates if your headset is connected to your
phone
- solid light means headset is connected to your
phone
- Flashing light means headset is in ‘pairing mode’
and ready to be connected to a new phone
battery
Indicator
Indicates battery level and if headset is turned ON
- Green light indicates that the headset has more
than 30 minutes of talk time remaining
- red light indicates that the headset has less
than 30 minutes of talk time remaining
to save battery the Jabra statusDisplay™ is turned off after 3 seconds .
Get an instant status from the Jabra statusDisplay™ by a tap on any
button on the headset when you are not on a call .
HoW tHE VoICE GUIDanCE WorKs
When your headset has established a connection to your phone (or
other Bluetooth® device) the voice guidance will say “connected” .
When your headset has less than 30 minutes talk time remaining
the voice guidance will say “low battery” .
USING JABRA WAVE WITH TWO MOBILE PHONES
Jabra WaVE is capable of having two mobile phones (or Bluetooth®
devices) connected to the headset at the same time . this will give
you the freedom of having only one headset to operate both your
mobile phones .
In order to use the headset with two mobile phone please make
sure you have ”paired” the Jabra WaVE with both phones . see the
section “PaIrInG It WItH YoUr PHonE” for instructions .