Bel Canto Design SET 40 - Manual (Page 4)

Page 4 SET 40 Owner's Manual
Unpacking
Unpacking
The box containing your SET 40 contains the
following parts:
1 - SET 40 User's Guide
1 - Power Cable for connection to utility
power [6' 7" - 2 meters long]
1 - SET 40 audio power amplifier
2 - 845 power triodes in a protective box,
these tubes may be shipped in a separate
shipping container.
1 - Bel Canto Owner's Warranty &
Registration Card
Carefully unpack each piece and check for
shipping damage. If there is any damage,
please contact your dealer or Bel Canto Design,
Ltd. Save all packing materials as the packing is
specially designed to protect the amplifier during
shipping or transporting. If you lose or damage
the packing materials or carton, please contact
your dealer or distributor before attempting to
transport the amplifiers.
The SET 40 power supply is preset for the
proper national voltages before you
receive it. The power cable will have the
correct plug for your local power system.
If you believe this is not true, please
contact your dealer immediately. Do not
attempt to alter or change power settings
yourself!
Warning
Do not connect power to this amplifier yet!
This power amplifier, like any electrical component, can be dangerous and cause injury unless
correct handling procedures are observed and used. Before powering this power amplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your SET 40 (do not remove the chassis covers). There are no user serviceable
parts inside. Any tampering of internal parts will immediately void your warranty.
Complete and mail the Owner's Registration Card immediately in order to activate your warranty.
!
!