Bi stro – Bodum Bistro Pour Over Coffee Machine 11001 User Manual

Page 9

Advertising
background image

8

BI

stro

cLeAnInG tHe coffee sHoWer

The coffee shower (11) can be cleaned and de-scaled separately. In order to
do so remove the housing lid (5) from the housing (1) of the pour over coffee
machine. Then lift the coffee shower (11) carefully vertically, up and out of
the pour over coffee machine. Now remove the large stopper (12) and small
stopper (13) by pulling these slowly out of the coffee shower. Clean all parts
thoroughly with de-scaling solution. Subsequently rinse all parts thoroughly
with clear water before putting the coffee shower carefully back together.
Ensure that the large stopper and small stopper are correctly seated and firmly
in place. Now place the coffee shower back in the pour over coffee machine
and carefully replace the housing lid.
CAUTION: When cleaning the coffee shower do not use hard brushes or point-
ed or sharp objects because these may scratch or damage the silicone surface.
IMPORTANT: The warranty is voided if no de-scaling is carried out or this is not
carried out in accordance with the operating instructions.

storAGe

Always disconnect the pour over coffee machine from the mains when it is not
in use.

tecHnIcAL DAtA

EURO mains voltage

220 - 240 v~ 50/60 Hz

USA mains voltage

120 v~ 60 Hz

EURO nominal power

1450 W

USA nominal power

1450 W

Cable length

80 cm

volumetric capacity

1.2 liter/40 fl. oz

Test marks

GS, CE, ETL, CETL

Advertising
This manual is related to the following products: