Assembly, Preparing pressure washer for use, Unpack the pressure washer – Briggs & Stratton 020238-0 User Manual

Page 7: Carton contents, Attach handle

Advertising
background image

7

SpeedClean™ 2000 PSI Pressure Washer

ASSEMBLY

IMPORTANT: Read entire operator’s manual before you
attempt to assemble or operate your new pressure washer.

Unpack the Pressure Washer

1.

Remove everything from carton except pressure
washer.

2.

Open carton completely by cutting each corner from
top to bottom.

3.

Remove pressure washer from carton.

Carton Contents

Items in the carton include:

•

Main Unit

•

Handle

•

High Pressure Hose

•

Spray Gun

•

Adjustable Nozzle Extension

•

Oil Bottle

•

Accessory Storage Bag

•

Axle

•

Wheel Kit (which includes the following):

•

Wheels (2)

•

Retaining Pins (2)

•

Handle Fastening Hardware Kit (which includes):

•

Carriage Bolts (2)

•

Plastic Knobs (2)

•

Parts Bag (which includes the following):

•

Safety Goggles

•

Operator’s Manual

•

Engine Operator’s Manual

•

Owner’s Registration Card

PREPARING PRESSURE

WASHER FOR USE

If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-743-4115. If calling for
assistance, please have the model, revision, and serial
number from the data tag available.

To prepare your pressure washer for operation, you
will need to perform these tasks:

1.

Fill out and send in registration card.

2.

Attach handle to main unit.

3.

Install wheel kit.

4.

Add oil to engine crankcase.

5.

Add fuel to fuel tank.

6.

Connect high pressure hose to spray gun and pump.

7.

Connect water supply to pump.

8.

Attach nozzle extension to spray gun.

Attach Handle

1.

Place handle onto base. Make sure holes in handle align
with holes on base. Insert carriage bolts through holes
from outside of unit and attach a plastic knob from
inside of unit (Figure 1).Tighten by hand.

Figure 1 — Secure Handle

Advertising