BBE DI-1000 - Manual (Page 11)

Frequency Response @ XLR Balanced Out,
process mode:…………………………………………………Program Controlled
bypass mode: …………………………………………………5Hz to 30kHz (+/- 1dB)
Signal to Noise Ratio:
BBE OUT ……………123dB Power Supply ……………118dB 9V battery
BBE IN (@ 10) ………118dB Power Supply ……………113dB 9V battery
THD: BBE OUT ………………………………………………………less than 0.02% at -l0dBu input (20-20kHz)
BBE IN …………………………………………………………less than 0.1% at -l0dBu input (20-20kHz)
Noise: PASSIVE ………………………………………………………-115dBu
ACTIVE BBE IN (@ 0) ………………………………………-110dBu
ACTIVE BBE IN (@ 10) ……………………………………-105dBu
Input Impedance:
instrument ……………………………………………………1 MEG Ohms
line ………………………………………………………………12k Ohms
Output Impedance:
XLR ……………………………………………………………600 Ohms
line ………………………………………………………………1k Ohms
Phase Deviation:
PASSIVE ………………………………………………………<1º @ 20Hz, 0º @ 1 kHz
ACTIVE ( BBE OUT) …………………………………………<11º @ 20Hz, 0º @ 1 kHz
* 0dBu = 0.775Vrms
Power Requirements:
DC inlet: ………………………………………………………+9VDC min. 200ma
Battery: …………………………………………………………9VDC 15 hour life
Dimensions: …………………...... ……………………………………6.625"(W) x 4.875"(D) x 2.0625"(H)
Shipping Weight: ………………………………………………………3.3 lbs.
Note: Due to continuing product improvement, specifications and design are subject to change without notice.
SPECIFICATIONS
11