Kinetik Love my Skin Anti-Ageing LMS6 - Manual (Page 6)

5
Using the Love My Skin Anti Ageing Pen 6
2 sec
1 min
1 min later
1. Ensure that the area to be treated is cleaned before use.
2. Remove the protective cover and press and hold the ON/OFF button for 2
seconds to turn the unit on. The unit will emit a beep while in use, showing that
the device is working properly.
3. Gently place the illumination area on to the skin (for the most effective results, the
illumination area must touch the skin at all times). Keep the illumination area in
place until the 1 minute treatment cycle has ended.
4. Once the treatment cycle has ended, the unit will automatically switch off. Clean
the illumination area with an alcohol wipe and replace the protective cover. Do
not immerse the unit in water.
For best results, do not exceed 1 treatment cycle in the same area in any 1 hour
period. If you have multiple areas to treat, treat each area for 1 minute then move to
the next affected area.