Koolance ERM-2K3UCU - Manual (Page 8)

8 9 User Manual
Positioning the ERM
The ERM-2K3U is designed to operate in 3 different orientations. The LED display
can be rotated appropriately by loosening and tightening its thumb screw. (NOTE:
horizontal orientations may require more coolant to be added for the reservoir.)
Connecting ERM Systems
Aluminum Post Feet
External Nozzles & Power Cable
Screw in the G 1/4” threaded
nozzles you purchased for
your ERM system.
Once the hoses are connected, plug the
external 9-pin cable into the ERM. Aluminum Post Feet
Connect the desired tubing to each of the
ERM’s rear nozzles.
Display Right - OK!
Display Left - OK!
Display Top -
OK!
Display Bottom -
NO!
Aluminum post feet and rubber foot pads are included. These are screwed into one
of the side panels. Be sure to use these feet for proper clearance if laying the ERM
with its fans pointed downward!
If the ERM can not be placed adjacent to the computer, it can be moved farther
away. Depending on heat load, 5-10 feet (1.5-3 meters) should be an acceptable
distance for most ERM configurations. Extra tubing can be purchased from
Koolance.com or your local reseller.
Insert the main power cable into the ERM unit
and connect the power brick to an appropriate
AC wall outlet.
The included power supply is auto-switching
and supports 110V/60Hz and 220V/50Hz.