Koolance RM2-4U - Manual (Page 19)

14 Connecting PC2 & IPC Systems
Tube to Reservoir
CPU Cooler Thermal Sensor
Tube from Heat Exchanger
Cutting Tube Lengths
Before securely clamping the coolers, you must cut appropriate lengths of tubing
to connect each device. It may be easier to temporarily lay your motherboard and
video card inside the case to better estimate the required amounts.
The system will come with two ends of tubing with which to attach your coolers.
These tubes are already connected and clamped to the Heat Exchanger and
Radiator.
Additional tubing has been included with
your system should you require it, and
more can be purchased from your
Koolance dealer.
With one of the connected hoses,
roughly estimate the length you will
need to your first cooler (usually the
CPU cooler), and cut it.
Cut the second hose with enough length
to connect with the last cooler that will
be in your system.
Using the leftover tubing, cut shorter
pieces to link between each individual
cooler.