Ride on, Tri-line fairing accents – Kuryakyn 6903 TRI-LINE FAIRING ACCENTS User Manual
Page 2
PAGE
2
TEST FIT:
STEP 3
Determine the Left and Right Tri-Line Fairing Ac-
cents.
STEP 4
Test fit the Left Tri-Line Fairing Accent as shown in
PIC 2. Use masking tape on the Accent and fairing
to make alignment marks.
Use masking tape to hold the Accents in place while
you align them.
Test fit the Right Accent on the other side.
Remove the Accents.
INSTALL:
STEP 5
Use your fingernail to rub the adhesive backing; this will activate the adhesive. Remove and dis-
card the backing.
STEP 6
Using the marks made in
STEP 4
, align the Accent and press it into place for one minute; full
bonding will occur after 24 hours. Remove and discard the masking tape.
STEP 7
Repeat
STEPS 5 and 6
for the other side
TRI-LINE FAIRING ACCENTS
INSTALLATION
Ride On!
CLUTCH-SIDE (LEFT)
PIC 3
PIC 2
CLUTCH-SIDE (LEFT)