Kuryakyn 6393 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST - Manual (Page 3)

23 Cedarhill Rd.
Bellingham, MA 02019
877-642-3722
- 3 -
Figure 1; loosen jam nuts and back off adjusting nuts.
Figure 2; Remove housing screws and cable retainer screw.
Figure 3; Separate housings and remove cables .
Figure 4; Remove front half of housing from bike .
Fig 5; Install Alignment Pin through jig and thread into housing.
Fig 6; Drill cable retainer to 13/32
Fig 7; Use Cruise-Mate Bushing as bolt to hold cable retainer.
Fig 9.: Step Drill