Kuryakyn 1488 UNIVERSAL DRINK HOLDER - Manual (Page 3)

PAGE
3
BEVERAGE CARRIER INSTALLATION
STEP 1 Hold the Beverage Carrier under the drink ring.
STEP 2
As shown in PIC 2, each of the three straps will go around the drink ring
from the outside to the inside.
STEP 3
Snap each of the three arms to the snaps (PIC 2) located inside the drink
holder.
TO PREVENT POSSIBLE LOSS OF CONTROL, WHICH COULD RESULT IN A
POSSIBLE INJURY OR DEATH, WE DO NOT RECOMMEND REMOVING AND
REPLACING OBJECTS IN THE HOLDER WHILE RIDING THE MOTORCYCLE.
Do not overload the Drink Holder with excessive weight.
The adjustability of the Drink Holder was not intended to prevent spills.
Ensure that the Drink Holder is secure on the Mount and that the Mount is secure
on the motorcycle. Küryakyn is not responsible for any belongings that are stolen
or damaged from use of this Drink Holder or from the Drink Holder or Mount not
being properly secured to the motorcycle. It is the installer’s responsibility to
ensure that all of the fasteners (including pre-assembled) are tightened before
operation of the motorcycle. Küryakyn will not provide warranty coverage on
products or components lost due to improper installation or lack of maintenance.
Periodic inspection and maintenance are required on all fasteners.
Ride On!
UNIVERSAL DRINK HOLDER
INSTALLATION
PIC 2
FOLD STRAPS FROM
OUTSIDE TO INSIDE