Kuryakyn 1660 MULTI-PURPOSE DRIVER/PASSENGER BACKREST - Manual (Page 3)

PAGE
3
THIS DRIVER/PASSENGER BACKREST IS NOT A SAFETY
RESTRAINING DEVICE. FAILURE TO HOLD ONTO THE
MOTORCYCLE MAY RESULT IN INJURY OR DEATH.
DO NOT operate the motorcycle with the Backrest extended
beyond the second notch when in the upright passenger position
to prevent bending of the inner adjustment rods!
It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened per these
instructions before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost
due to improper installation or lack of maintenance. Visually
inspect the Shoulder Washers and Countersunk Socket Head Cap
Screws for any signs of loosening before each ride. Küryakyn
requires checking all backrest attaching fasteners to the torque specifications
defined in these instructions every 3,000 to 5,000 miles.
STEP 5
To use the integrated luggage rack when the back rest is in the passenger position, simply pull
down to release it from the rubber catch. To stow it, lift up and press it firmly to “sink” it into the
rubber catch. PIC 6
THE LUGGAGE RACK HAS A 10 POUND LOAD CAPACITY. IT IS UP TO THE
RIDER TO USE THE RACK IN A SAFE AND PROPER MANNER.
OVERLOADING OR USING THE RACK IMPROPERLY MAY RESULT IN LOSS
OF CONTROL, WHICH MAY RESULT IN SEVERE DAMAGE TO THE
MOTORCYCLE AND/OR SERIOUS INJURY OR DEATH TO THE RIDER
AND/OR THEIR PASSENGER. KÜRYAKYN IS NOT RESPONSIBLE FOR ANY
DAMAGE, LOSS, OR INJURY CAUSED BY EXCEEDING THE LOAD
CAPACITY.
Ensure that the installation of this product does not interfere with the
proper operation of the motorcycle before riding.
Ride On!
DRIVER/PASSENGER BACKREST
INSTALLATION
PIC 6
LOWERED LUGGAGE RACK
RUBBER CATCH