Kuryakyn 1790 UNIVERSAL DRINK RING W/BEVERAGE HOLDER - Manual (Page 3)

PAGE
3
BEVERAGE CARRIER INSTALLATION
STEP 1
Hold the Beverage Carrier under the drink ring.
STEP 2
As shown in PIC 5, each of the three straps will go around the drink ring from the
outside to the inside.
STEP 3 Snap each of the three arms to the snaps (PIC 5) located inside the drink holder.
STEP 4
Turn the handlebars in both directions to their full stop position and ensure that
there is clearance between the Universal Drink Ring/Beverage Holder and the gas
tank, dash and other components on the motorcycle.
ENSURE THAT THERE IS CLEARANCE AT ALL POINTS WHEN
THE HANDLEBARS ARE TURNED, INSUFFICIENT CLEARANCE
MAY CAUSE DAMAGE TO THE MOTORCYCLE OR CAN CAUSE
LOSS OF CONTROL THAT COULD RESULT IN SEVERE INJURY
OR DEATH.
TO PREVENT POSSIBLE LOSS OF CONTROL, WHICH COULD
RESULT IN SERIOUS INJURY OR DEATH, WE DO NOT
RECOMMEND REMOVING OR REPLACING THE BEVERAGE IN
THE HOLDER WHILE RIDING THE MOTORCYCLE .
Ensure that the Drink Ring/Beverage Holder is secure to the
motorcycle. Küryakyn is not responsible for items that may be stolen
or damaged in relation to the use of this use of this Drink
Ring/Beverage Holder or from the Drink Ring/Beverage Holder not
being properly secured to the motorcycle.
Do not overload the Drink Ring/Beverage Holder with excessive weight.
Ride On!
DRINK RING/BEVERAGE HOLDER
INSTALLATION