Labnet Constant Temperature Selection Guide - Manual (Page 7)

7
• Shake and incubate samples simultane-
ously
• Supplied with interchangelable platforms
for 15 and 50mL tubes
• Broad temperature and speed range
• Intelligent control with digital LED display
Temp Range Ambient +5º to 99ºC
Temp Accuracy ±0.5ºC
Speed range 200 - 900 rpm
Motion/orbit Circular/3mm
Timer 1 - 99 min or continuous
Capacity 18 x 15mL tubes or
8 x 50mL tubes
Dimensions 26 x 31 x 31cm/
10.2 x 12.2 x 12.2 in
Weight 26.6 lb/12 kg
Specifications
Cat# Description
S2050A* Vortemp 1550 Shaking incubator for 15 and 50mL
tubes, 120V
C1205 Individual adapters for 0.5/0.6mL tubes, pk/6
C1206 Individual adapters for 0.4mL tubes, pk/6
C1222 Individual adapters form 0.2mL tubes, pk/6
*To order 230V units add -230V to the end of the catalog number. 230V units include EU and UK cords.
Vortemp 1550 TM Shaking Incubator
• Small foot print
• 8 interchangeable blocks to accomodate
all of your tube sizes
• Rapid cooling and heating
• Fine-tune speed control from 300-1500rpm
Cat# Description
I-4001-HCS AccuTherm Microtube shaking incubator, 120V
I-4002-HCS AccuTherm Microtube shaking incubator, 230V
I-4000-A Block A, 40 x 1.5mL
I-4000-B Block B, 54 x 0.5mL
I-4000-C Block C, 96 x 0.2mL
I-4000-D Block D, 24 x 15mL
I-4000-E Block E, Water bath (ID: 115 x 73 x 38mm)
I-4000-G Block G, 26 x 0.5mL and 24 x 1.5mL
I-4000-H Block H, 40 x 0.2mL
I-4000-J Block J, 96 well ELISA plate
Ordering Information Ordering Information
Mini Incubator
Cat# Description
I5110A Mini Incubator, 120V
I5110-MLR* Mini Incubator with Mini LabRoller and rotisseries for
1.5, 15 and 50mL tubes
I5110-SHELF Additional shelf, 22 x 18 cm
W0020-110C Non-toxic safety thermometer for -20º to 110ºC, with 1
resolution, 305mm long, 76mm immersion
*To order 230V units add -230V to the end of the catalog number, Specify cord type by adding -EU or -UK
• Ideal for small laboratories and classrooms
• Broad temperature range
• Rear cord port allows for use of small
mixers inside
• Includes one shelf, which can be placed
at two points within the corrosion resistant
chamber
Temp Range Ambient +5º to 60ºC
Capacity 9.2 liters/0.375 cu ft
Controls Analog
Exterior dims 28.5 x 28 x 33.5 cm/
11.2 x 11 x 13.2 in
Interior dims 12 x 20 x 20 cm/
9 x 7.9 x 7.9 in
Weight 18.4 lb/8.3 kg
I5110-MLR
Ordering Information
Specifications
Booklet final - CT selection guide.indd 7 9/9/2013 1:36:32 PM