Activate/deactivate call duration display, Setting the pause time, Changing the dialling mode – Siemens Euroset 5020 User Manual

Page 5: Changing dialling modes during a call, Operation on a pabx, Enter/delete an external line prefixe, Recall key (on a pabx)

Advertising
background image

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006

5

GB

When the telephone is locked, you will see

{

in the

display.

Activate/deactivate call duration display

The telephone can display the approximate call duration in

the display (up to 99 min. 59 sec., default setting: on). If the

call duration display is activated, the time display begins

8 seconds after the last digit is dialled.

?18#

Initiate function.

0

/

1

0: deactivate; 1: activate.

?

Press the Set key.

Setting the pause time

If necessary, the pause time of the Pause key

;

(pause

function from second input position) can be changed to 1,

3 or 6 seconds (default setting: 3 seconds).

?102

Initiate function.

0

...

2

0: 1 sec.; 1: 3 sec.; 2: 6 sec..

?

Press the Set key.

Changing the dialling mode

?#

Initiate function.

1

/

2

1: Tone dialling.

2: Pulse dialling without flash function.

?

Press the Set key.

Changing dialling modes during a call

If your telephone is set to pulse dialling and you want to use

functions that require tone dialling (e.g. remote access to

an answering machine), you can change the dialling mode

during a call.

*

With an open connection: press the star key.

o

Enter digits for remote control/data transfer.

The telephone is reset to the original dialling mode by hang-

ing up the handset.

Operation on a PABX

Enter/delete an external line prefixe

If you are using your telephone on a PABX, you may have to

save one or more external line prefixes. A dialling pause is

set automatically with the external line prefixe. You can save

up to three external line prefixes.

?0

Initiate function.
If no external line prefixe has been set in a

location, z appears in the display.

If several external line prefixes are saved, these

are displayed next to one another; the current

external line prefixe to be edited flashes.

If necessary, use the

;

key to toggle

between the external line prefixes displayed,

to edit them as follows:
To delete an external line prefix:

?

Press the Set key.
To enter an external line prefixe:

o

Enter a one- to three-digit code.
Enter additional external line prefixes:

;

o

Press the Redial key, enter next external line

prefixe.

?

Press the Set key.

Recall key (on a PABX)

During an external call, you can make a recall or divert the

call. To do this, press the Recall key

>

. The subsequent

procedure depends on your PABX. By default, the Recall key

is preset to a flash time (interruption time) of 90 ms for use

of new features on public telephone systems. With a

connection to a PABX, it may be necessary to change the

flash time (e.g. 600 ms). To do this, please refer to the

operating instructions for your PABX.

Advertising