Theft protection, keycard, Theft protection, Removing a keycard – Blaupunkt Frankfurt C70 User Manual

Page 6: Inserting the keycard

Advertising
background image

42

Note:
If a wrong card, e.g. a cash card, is introduced
into the car radio, “Wrong KC” will appear on
the display.
Remove the wrong card and slide in a Key-
Card your unit will recognise.

Removing a KeyCard

In order to unlock the operating panel,

➮

press the

button

1

.

The operating panel then opens.

➮

Place the card on the carriage and slide
as far to the right as it will go.

➮

Pull the card out of the operating panel.

➮

Close the operating panel.

Note:
In order to prevent theft, remove the KeyCard
when you leave the vehicle and leave the op-
erating panel open.

For safety reasons, the operating panel

should always be locked when the vehicle
is in motion.

Making a second KeyCard “learn”
the code Replacing a KeyCard

You can use the first KeyCard to make a sec-
ond KeyCard “learn” to be an additional Key-
Card when the car radio is in operation.

If you want a second KeyCard to “learn” the
code,

➮

insert the first KeyCard and switch the
radio on;

➮

press the MENU button

8

.

➮

press the soft key

4

with the display

allocation “KC”;

➮

press the soft key

4

with the display

allocation “LRN”.

“LEARN KC” appears on the display.

Theft protection, KeyCard

A KeyCard is supplied along with the radio.

The car radio can also be used with a sec-
ond KeyCard.

If a KeyCard is lost or damaged, you can ob-
tain a replacement KeyCard through a Blau-
punkt dealer.

If you use two KeyCards, the settings of the
first KeyCard also apply to the second Key-
Card. You do, however, have the option of stor-
ing the following functions individually:
station-button allocation, traffic-information
volume, beep volume, equaliser setting.

In addition, the last set values for wavelength,
station settings, scanning time and switch-
on volume remain stored.

This means that you always have your se-
lected basic setting after inserting the Key-
Card.

Inserting the KeyCard

➮

Press the

button

1

.

The operating panel opens.

➮

Insert the KeyCard with the contact sur-
faces facing down as illustrated in the
picture (arrow 1).

2

1

3

➮

Carefully place the KeyCard on the car-
riage and slide it in as far as it will go in
the direction of the arrow (2).

➮

Close the operating panel (arrow 3).

THEFT PROTECTION

Advertising