Billion Electric Company BiPAC 7404V Series - Manual (Page 124)

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
123
Ring & Tone
This section allows advanced user to change the existing or newly defined parameters for the
various ring tones (dial tone, busy tone, answer tone and etc.)
Country Specific Ring & Tone
Region: Select a country ring-tone, from the drop-down list, where you are located. This VoIP router
provides default parameter of ring tones according to different countries. The ring-tone parameters are
automatically displayed after entering a specific country. If your country is not in the list, you may
manually create ring-tone parameters.
Ring Parameters
Ring Cadence (in ms): Ring cadence is defined by three fields, Frequency: On Time1, Off Time1, On
Time2, Off Time2 and On Time3, Off Time3. Frequency is specified in Hertz. Time is given in
milliseconds.
Tone Parameters
You may need to check with your local telephone service provider for such information. Also, it is
recommended that this option be configured by an advanced user, unless you are instructed to do so.
Click Apply to apply the settings.