Leica Biosystems SP9000 User Manual
Leica sp9000, Automatic knife sharpener
Advertising
Table of contents
Document Outline
- 1. Important Notes
- 1.1 Symbols used in this manual and
- their meaning
- 1.2 Designated use / misuse
- 1.3 Selection and qualification of personnel
- 2. Safety
- 2.1 General information on instrument design and safe handling
- 2.2 Safety instructions for handling the instrument
- 3. Instruments properties
- 3.1 Technical Data
- 3.2 General Description
- 3.3 Overview - SP9000
- 4. Installation
- 4.1 Check list
- 4.2 Installing the instrument
- 5. Coarse honing procedure 13
- 5.1 . Inspect for presence and size of nicks
- 5.2. Put honing plate on holder
- 5.3. Apply coarse abrasive to the plate
- 5.4. Attach knife
- 5.5. Centre the knife using a ruler
- 5.6 Set coarse honing knob 16
- 5.7 Set Timer at 30 minutes 16
- 5.8 Push the blue coarse button on the control panel
- 5.9 Remove knife carefully
- 5.10 Clean knife - inspect condition
- 5.11 Clean glass plate - continue Coarse Honing if necessary
- 6. Fine coarse procedure
- 7. Redressing hone glass plates
- 8. Trouble shooting
- 9. Warranty and service