Brother MFC 9560CDW - Manual (Page 170)

154
7.Network
(MFC-9560CDW)
(Continued)
1.Wired LAN
(Continued) 2.Ethernet
—
Auto
*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link mode.
3.Wired Status
—
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired status.
4.MAC Address
— — Shows the MAC
address of the
machine.
5.Set to Default
—
1.Reset
2.Exit
Restore the wired
network setting to
factory default.
6.Wired Enable
—
On
*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot Method Auto
*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
[000-255]. [000-255].
[000-255]. [000-255] Enter the IP address.
3.Subnet Mask
[000-255]. [000-255].
[000-255]. [000-255] Enter the Subnet
mask.
4.Gateway
[000-255]. [000-255].
[000-255]. [000-255] Enter the Gateway
address.
5.Node Name BRWXXXXXXXXXXXX
Enter the Node
name.
6.WINS Config Auto
*
Static
Chooses the WINS
configuration mode.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.