Lenze Controller-based Automation - Manual (Page 17)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
17
4 System description
4.1 Visualisation system structure
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.2 Integrated control system
The control system (Logic/Motion) and the visualisation run on the same IPC (controller, Visu).
The visualisation (Visu) ...
• is directly coupled to the control system (Logic/Motion);
• can access variables of the control system and (depending on the bus system) in addition can
directly access the parameters of the field devices.

Note!
The integrated control system is only provided for IPCs/controllers with an integrated
monitor panel or for IPCs/controllers with a DVI interface for an external monitor panel/
display.

"Controller-based Automation" system manual
Here you'll find more information relating to the visualisation as part of a control
system.