Lenze 8400 BaseLine Manual - Manual (Page 41)

Technical data
Control terminals
Analog input
4

41 EDS84ABD302 EN 4.0
4.5.2 Analog input
Labelling Feature Rated value
A1U
GND
Input 0 ... +10 V with DC voltage
0 ... +5 V DC (0 ... +20 mA)
1 ... +5 V DC (+4 ... +20 mA)
Input resistance > 50 kΩ with DC voltage
250 Ω (external) with DC current
Input voltage in case of open circuit Display ”0” (U < 0.2 V, absolute)
Sampling frequency 1 kHz (1 ms)
Accuracy ± 0.1 V
Electric strength of external voltage ± 15 V, permanent
A/D converter 10 bit resolution
Error 1 digit ≡ 0.1 % with regard to final value