Brinkmann Series 4615 - Manual (Page 25)

24
NOTE: With the help of a friend, turn
the cart to its upright position.
Step 4
Attach the grease cup bracket onto
the back panel by inserting the three
tabs into the slots on the back cart
panel.
NOTE: When performing Step 5,
Lift grill body from front and
rear panels to avoid injury to
hands and fingers.
Step 5
With the help of a friend, place grill
body assembly on cart frame. Grill
body will rest between upper side
sections of cart. Align front edge of
grill body assembly with front edges
of cart frame legs.
Step 6
Secure using four M6 X 12mm bolts.
At this point, fully tighten four bolts
holding back panel from Step 2.
Grill Body
Assembly