Bay Technical Associates BayStack 400-ST1 - Manual (Page 40)

38
• The port connection to the load host cannot be
through a MultiLink Trunk.
• During the load process, the ports are configured as
follows:
• Twisted-pair ports: autonegotiation enabled.
• Fiber optic ports: 100 Mb/s, half-duplex.
• Gigabit MDA ports: autonegotiation disabled,
Preferred Phy set to Right.
For detailed information about downloading a new
software image, see “Chapter 3, “Using the Console
Interface,” in the Using the BayStack 450 10/100/1000
Series Switch guide.